SEALDH‑II: An airborne, autonomous, calibration-free TDLAS Hygrometer. First in-flight results with metrological links to the German Primary Humidity Standards
Abstract:
To fill this gap and provide “traceable”, i.e. metrologically validated, airborne hygrometers we developed the Selective Extractive Airborne Laser Diode Hygrometer, SEALDH, which uses dTDLAS with a special, calibration-free data evaluation to circumvent the need for frequent field calibrations and to ensure high accuracy and comparability by a holistic data quality assurance concept in combination with extensive metrological validations at national primary standards. Thus SEALDH-II can be used in a calibration-free field sensor mode (with an absolute, metrologically defined uncertainty of 4.3% +- 3ppmv). The response time is mainly limited by the gas flow and significantly below 1 sec, yielding precision down to 0.08 ppmv (1σ, 1sec) measured at 600 ppmv and 1000 hPa. Its excellent long-term stability, <1% over 18 months, and the metrologically validated range from 5 to 30 000 ppmv makes it also well suited as a hygrometric field transfer standard. SEALDH-II has been recently operated without any failures for over 50 hours on several airborne science missions (DENCHAR, AIRTOSS-I, and AIRTOSS-II). In addition SEALDH participated in the representative, international comparison AquaVIT‑II.
The performance during these missions and the value of a traceability will be demonstrated and discussed.
