Rainfall Runoff Modelling for Cedar Creek using HEC-HMS modelBy Pratik Pathak1 and Ajay Kalra2

Abstract:

Rainfall-runoff modelling studies are carried out for the purpose of basin and river management. Different models have been effectively used to examine relationships between rainfall and runoff. Cedar Creek Watershed Basin, the largest tributary of St. Josephs River, located in northeastern Indiana, was selected as a study area. The HEC-HMS model developed by US Army Corps of Engineers was used for the hydrological modelling. The national elevation and national hydrography data was obtained from United States Geological Survey National Map Viewer and the SSURGO soil data was obtained from United States Department of Agriculture. The watershed received hypothetical uniform rainfall for a duration of 13 hours. The Soil Conservation Service Curve Number and Unit Hydrograph methods were used for simulating surface runoff. The simulation provided hydrological details about the quantity and variability of runoff in the watershed. The runoff for different curve numbers was computed for the same basin and rainfall, and it was found that outflow peaked at an earlier time with a higher value for higher curve numbers than for smaller curve numbers. It was also noticed that the impact on outflow values nearly doubled with an increase of curve number of 10 for each subbasin in the watershed. The results from the current analysis may aid water managers in effectively managing the water resources within the basin.

¹ Graduate Student, Department of Civil and Environmental Engineering, Southern Illinois University Carbondale, Carbondale, Illinois, 62901-6603

² Development Review Division, Clark County Public Works, 500 S. Grand Central Parkway, Las Vegas, NV 89155, USA