Combining DSMC Simulations and ROSINA/COPS Data of Comet 67P/Churyumov-Gerasimenko to Develop a Realistic Empirical Coma Model and to Determine Accurate Production Rates

Abstract:

We have previously published results from the AMPS DSMC (Adaptive Mesh Particle Simulator Direct Simulation Monte Carlo) model and its characterization of the neutral coma of comet 67P/Churyumov-Gerasimenko through detailed comparison with data collected by the ROSINA/COPS (Rosetta Orbiter Spectrometer for Ion and Neutral Analysis/COmet Pressure Sensor) instrument aboard the Rosetta spacecraft [Bieler, 2015]. Results from these DSMC models have been used to create an empirical model of the near comet coma (<200 km) of comet 67P. The empirical model characterizes the neutral coma in a comet centered, sun fixed reference frame as a function of heliocentric distance, radial distance from the comet, local time and declination. The model is a significant improvement over more simple empirical models, such as the Haser model. While the DSMC results are a more accurate representation of the coma at any given time, the advantage of a mean state, empirical model is the ease and speed of use. One use of such an empirical model is in the calculation of a total cometary coma production rate from the ROSINA/COPS data. The COPS data are in situ measurements of gas density and velocity along the ROSETTA spacecraft track. Converting the measured neutral density into a production rate requires knowledge of the neutral gas distribution in the coma. Our empirical model provides this information and therefore allows us to correct for the spacecraft location to calculate a production rate as a function of heliocentric distance. We will present the full empirical model as well as the calculated neutral production rate for the period of August 2014 – August 2015 (perihelion).