Mechanisms of Surface Wave Energy Dissipation over a Fluid Mud Sediment Suspension

Tuesday, 16 December 2014: 10:50 AM
Peter Traykovski1, John H Trowbridge1 and Gail C Kineke2, (1)WHOI, Woods Hole, MA, United States, (2)Boston College, Chestnut Hill, MA, United States
Field observations from the spring of 2008 on the Louisiana shelf were used to elucidate the mechanisms of wave energy dissipation over a muddy seafloor. After a period of high discharge from the Atchafalaya River acoustic measurements showed the presence of 20 cm thick mobile fluid mud layers during and after wave events. While total wave energy dissipation (D) was greatest during the high energy periods, these periods had relatively low normalized attenuation rates (Κ = Dissipation/Energy Flux). During declining wave energy conditions, as the fluid mud layer settled, the attenuation process became more efficient with high Κ  and low D. The transition from high D and low Κ to high Κ and low D was caused by a transition from turbulent to laminar flow in the fluid mud layer as measured by a Pulse-coherent Doppler profiler. Measurements of the oscillatory boundary layer velocity profile in the fluid mud layer during laminar flow reveal a very thick wave boundary layer with curvature filling the entire fluid mud layer, suggesting a kinematic viscosity two to three orders of magnitude greater than clear water. This high viscosity is also consistent with a high wave attenuation rates measured by across shelf energy flux differences. The transition to turbulence was forced by instabilities on the lutocline, with wavelengths consistent with the dispersion relation for this two layer system. The measurements also provide new insight into the dynamics of wave supported turbidity flows during the transition from a laminar to turbulent fluid mud layer.