The Geoscope Seismic Network

Monday, 15 December 2014
Nicolas Leroy1, Eleonore Stutzmann1, Alessia Maggi2, Martin Vallee1 and Constanza Pardo1, (1)Institut de Physique du Globe de Paris, Paris, France, (2)EOST École et Observatoire des Sciences de la Terre, Strasbourg Cedex, France
The GEOSCOPE observatory provides 32 years of continuous broadband data to the scientific community. The 31 GEOSCOPE stations are installed in 19 countries, across all continents and on islands throughout the oceans. They are equipped with three component very broadband seismometers (STS1 or STS2) and 24 or 26 bit digitizers (Q330HR). Seismometers are installed with warpless base plates, which decrease long period noise on horizontal components by up to 15dB. In most stations, a pressure gauge and a thermometer are also installed. In 2014, we upgraded 4 stations: SSB in France, CAN in Australia, ROCAM in Rodrigues and ECH in France. 27 stations send data in real or near real time to the GEOSCOPE Data Center and to tsunami warning centers. Continuous data of all stations are collected in real time or with a delay by the IPGP Data Center in Paris where they are validated, archived and made available to the international scientific community through different interfaces including web services (see details on http://geoscope.ipgp.fr). In 2015, GEOSCOPE data will also be available through the French national data center RESIF. Seismic noise level of the continuous data are computed every 24 hours and accessible via the geoscope web site. GEOSCOPE data are also validated by comparing real and synthetic body wave waveforms using the SCARDEC method (Vallee et al., 2011). The information on earthquake characteristics, on GEOSCOPE data available for each event and on the waveform fit for each channel are available through the geoscope web portal.