S13F-01:
Current Status and Future Prospect of K-NET and KiK-net

Monday, 15 December 2014: 1:40 PM
Shin Aoi, Takashi Kunugi, Wataru Suzuki, Hiromitsu Nakamura and Hiroyuki Fujiwara, NIED National Research Institute for Earth Science and Disaster Prevention, Tsukuba, Japan
Abstract:
During 18 years since the deployment of K-NET following the Kobe earthquake, our attention has mainly focused on rapidity of the data collection and an unfailing and reliable observation. In this presentation, we review three generations of the instruments employed by K-NET and KiK-net from these two points of view.
At beginning of the 2000’s, we newly developed the second generation instruments (K-NET02, K-NET02A, KiK-net06) to replace the first generation instruments (K-NET95, SMAC-MDK) employed when the networks were constructed in the 1990’s. These instruments have an automatic dial-out function. It takes typically 2–5 s to establish communication and a few seconds to send the pre-trigger data. After that, data is available typically within a 1.5 s delay. Not only waveform data but also strong motion indexes such as real-time intensity, PGA, PGV, PGD, and response spectra are continuously sent once a second.
After the 2011 Tohoku earthquake, we have developed the third generation instruments (K-NET11, KiK-net11) and have replaced almost half of the all stations country wide. Main improvement of this instrument is more unfailing and reliable observation. Because we have often experienced very large ground motions (e.g. 45 records exceeding gravity), the maximum measureable range was expanded from 2000 gal to 4000 gal for the second generation instrument, and to 8000 gal for the third. For the third generation instrument, in case of power failure, observation (including transmission of data) works for seven days thanks to the backup battery, while for the second generation instruments it works only for one day. By adding an oblique component to the three-component accelerometers, we could automatically distinguish shaking data from noise such as electric pulses which may cause a false alarm in EEW. Implementation to guarantee the continuity of observation under severe conditions such as during the Tohoku earthquake is very important, as well as a highly efficient observation.
Owning to the drastic progress of information technologies, continuous observation has become technically and economically feasible and some of stations are experimentally equipped with a continuous communication line. Continuous observation offers very important information to help mitigating ongoing earthquake disasters.