In-channel Restoration Structures and the Implications on Hyporheic Exchange: a Laboratory Experiment

Abstract:

In-channel structures, i.e. cross-vanes and J-hooks, are commonly installed in river restoration projects to modify the streambed morphology and stream water surface profile, and are known to change hyporhiec exchange flux and habitats for riverine animals. However, few studies have continuous and accurate pre- and post-treatment data to evaluate the impact of these structures on channel hydraulic gradients and morphology. To quantify the effects of in-channel structures, we developed a scaled physical model of a meandering stream with a cross-vane and 6 J-hooks on a mobile-bed river table. Close-range photogrammetry technique was applied to obtain 3-D water and ground surface profiles with sub-millimeter vertical accuracy and horizontal resolution. The experiment was compared with a control experiment without structures while maintaining the same initial conditions of river bed, floodplain and stream flow. Results indicated that the cross-vane caused an average local head loss that represented 16% of the total stream reach head loss, and a 74% increase in channel load in the entire stream reach. Most J-hooks can create stepwise patterns in stream longitudinal profile, and cross-vane can create even more significant ones. Hydraulic gradients across the intra-meander zone also increased with in-channel structures, i.e. from 2.5% to 3.5% at the meander neck. Scour pools developed downstream of the cross-vane, and mostly around the 4 meander apex J-hooks at their hooked tip. Backwater caused by the cross-vane steepened the local water table profile by an additional 4.2%, and was the primary driver of statistically significant hydraulic gradient increase. Reach scale water and streambed surface profiles from our study provided detailed data to improve the understanding of in-channel structure effects, and may serve as reliable data source in computational modeling of hyporheic exchange.